The battery-powered tool AL-1 90° is ideally suited for ground point milling and deburring of rivet holes in titanium, steel, carbon fibre and light metals.
With these devices, an optimal problem solution is created for applications in the industrial processing of difficult to access holes that cannot be processed by automation.

• Fully equipped AL-1 set to start working straight away
• Includes tools for easy exchange of the collet
• Padded case for quick change of workstation

AL-1 90°:

• Speed: 400 rpm
• Power supply: LI battery 3.7 Volt, 2600 mAh
• Length: 291 mm
• Max. Diameter: 33 mm
• Weight: 316 g
• Collets: ⌀ 1.6 mm - 2.35 mm - 3 mm - 1/8"
• Head: 90°
• Charging time: 3 h
• Sound pressure level: 45 dB(A)

LINO-1:

• Mains voltage: 100...240 VAC, 6 W, 50/60 Hz
• Charging voltage: 3.7 VDC, 700 mA, 2.59 VA
• Standby power consumption: <0.1 mW
• Protection class: ll
• Weight of plug-in charger: 65 g
• Weight of charging station: 175 g

Case:

• Dimensions: L 330 x W 250 x H 70 mm
• Weight: 1.5 kg

• Battery tool AL-1 90° with 3 mm collet + clamping pin
• Collet wrench set 45° / 90
• Countersink
• Lino-1 charging station
• Plug-in power supply
• Padded case
• Instruction manual

The battery-powered tool AL-1 45° is ideally suited for ground point milling and deburring of rivet holes in titanium, steel, carbon fibre and light metals.
With these devices, an optimal problem solution is created for applications in the industrial processing of difficult to access holes that cannot be processed by automation.

• Fully equipped AL-1 set to start working straight away
• Includes tools for easy exchange of the collet
• Padded case for quick change of workstation

AL-1 45°:

• Speed: 400 rpm
• Power supply: LI battery 3.7 Volt, 2600 mAH
• Length: 285 mm
• Max. Diameter: 33 mm
• Weight: 317 g
• Collets: ⌀ 1.6 mm - 2.35 mm - 3 mm - 1/8"
• Head: 45°
• Charging time: 3 h
• Sound pressure level: 45 dB

LINO-1:

• Mains voltage: 100...240 VAC, 6 W, 50/60 Hz
• Charging voltage: 3.7 VDC, 700 mA, 2.59 VA
• Standby power consumption: <0.1 mW
• Protection class: ll
• Weight of plug-in charger: 65 g
• Weight of charging station: 175 g

Case:

• Dimensions: L 330 x W 250 x H 70 mm
• Weight: 1.5 kg

• Battery tool AL-1 45° with 3 mm collet + clamping pin
• Collet wrench set 45° / 90
• Countersink
• Lino-1 charging station
• Plug-in power supply
• Padded case
• Instruction manual

The battery-powered tool AL-1 0° is ideally suited for ground point milling and deburring of rivet holes in titanium, steel, carbon fibre and light metals.
With these devices, an optimal problem solution is created for applications in the industrial processing of difficult to access holes that cannot be processed by automation.

• Fully equipped AL-1 set to start working straight away
• Includes tools for easy exchange of the collet
• Padded case for quick change of workstation

AL-1 0°:

• Speed: 400 rpm
• Power supply: LI battery 3.7 Volt, 2600 mAh
• Length: 293 mm
• Max. Diameter: 33 mm
• Weight: 347 g
• Collets: ⌀ 3 mm
• Head: 0°
• Charging time: 3 h
• Sound pressure level: 45 dB(A)

LINO-1:

• Mains voltage: 100...240 VAC, 6 W, 50/60 Hz
• Charging voltage: 3.7 VDC, 700 mA, 2.59 VA
• Standby power consumption: <0.1 mW
• Protection class: ll
• Weight of plug-in charger: 65 g
• Weight of charging station: 175 g

Case:

• Dimensions: L 330 x W 250 x H 70 mm
• Weight: 1.5 kg

• Battery tool AL-1 0° with 3 mm collet + clamping pin
• Collet wrench set 0°
• Countersink
• Lino-1 charging station
• Plug-in power supply
• Padded case
• Instruction manual